Description
GE IS220PSVOH1A Servo Valve Control Module
Product Overview
The GE IS220PSVOH1A (PSVO) is a simplex Servo Control I/O Pack developed by General Electric for the Mark VIe and Mark VIeS Distributed Control Systems (DCS). It serves as the direct digitizing and electrical interface between one or two 10/100 Mbps I/O Ethernet networks and a servo terminal board (such as TSVO or WSVO).
The PSVO module manages two independent servo valve position control loops. It generates LVDT excitation outputs, reads LVDT position feedback, processes pulse rate inputs, and outputs regulated DC currents to hydraulic or pneumatic servo valves used in heavy-duty gas and steam turbines.
Technical Specifications
| Parameter | Specification Details |
| Manufacturer / Family | General Electric (GE) / Mark VIe & Mark VIeS Series |
| Part Number / Revision | IS220PSVOH1A (Group 1, Conformal Coated) |
| Product Type | Simplex Servo Control I/O Pack (PSVO) |
| Processor & Memory | 32-bit High-Speed Microprocessor with 128 MB SDRAM & Flash Memory |
| Input Power Voltage | 28 V DC nominal (Range: 14 V DC to 32 V DC) |
| Ethernet Communication | Dual redundant RJ45 ports (10/100 Mbps full-duplex with auto-negotiation) |
| Servo Valve Output | 2 closed-loop outputs, configurable current range (typically 10 mA to 120 mA DC) |
| LVDT Excitation & Inputs | 3.2 kHz LVDT excitation output; supports up to 8 LVDT feedback inputs |
| Pulse Rate Inputs | 2 pulse rate inputs (e.g., for fuel flow meter feedback) |
| LED Indicators | Power, Attention (ATTN), ENet1/ENet2 status, ENA1/ENA2 |
| Operating Temperature | -30 °C to +65 °C (-22 °F to 149 °F) |
| PCB Coating | Conformal coating for harsh industrial environment resistance |
Key Advantages
- High-Precision Servo Loops: Integrates excitation generation, position acquisition (LVDT), and closed-loop current regulation into a single compact device to maximize turbine response speed and stability.
- Dual Ethernet Fault Tolerance: Supports concurrent communication across dual I/O network paths (ENet1 and ENet2). If one network drops, traffic transfers instantly without bump or process interruption.
- Automated Module Replacement: Supports auto-reconfiguration via GE’s ToolboxST application. When replacing a faulty pack, the control system automatically downloads matching parameters and firmware without manual programming.
- Comprehensive Onboard Diagnostics: Includes internal ambient temperature sensors, supply voltage monitoring, line integrity checks for LVDTs/solenoids, and front panel diagnostic LEDs.
- Ruggedized Design: Features conformal-coated circuit boards and an industrial operating range (-30 °C to +65 °C) to endure high vibrations and extreme ambient temperatures in turbine enclosures.
Important Usage & Installation Precautions
- Manual Reconfiguration Required for Terminal Board Swaps: While replacing the IS220PSVOH1A I/O pack supports auto-reconfiguration, replacing the underlying terminal board (e.g., TSVO) requires manual reconfiguration via ToolboxST.
- LVDT Calibration & Stroking: Following installation or replacement, perform full actuator stroke testing (manual mode actuation, position ramping, or step-current response) to verify LVDT zero/span settings and eliminate mechanical binding.
- Proper Power Delivery: Ensure a stable 28 V DC power line is provided via the terminal board connector. The built-in soft-start circuit prevents current surges, but voltage drops below 14 V DC will force module reset.
- Electrostatic Discharge (ESD) Protection: Sensitive microprocessor components require technician ESD wrist-grounding when plugging or unplugging the pack to prevent static discharge damage.
- Cable Shielding & Grounding: LVDT and servo current feedback loops handle low-level analog signals; ensure proper cable shield termination on the terminal board to prevent electromagnetic interference (EMI) from high-voltage turbine ignition or generator excitation circuits.
Applications
- Gas Turbine Fuel Valve Control: Direct control of fuel gas control valves (GCV), speed ratio valves (SRV), and liquid fuel bypass valves in GE Frame 6, 7, and 9 gas turbines.
- Steam Turbine Inlet & Governor Valves: Positioning main steam stop valves, control valves (CV), and reheat intercept valves in combined-cycle or fossil power plants.
- Variable Inlet Guide Vane (IGV) Control: Precision hydraulic actuator positioning for compressor inlet guide vanes to regulate airflow into gas turbine combustion chambers.
- Flow Meter Monitoring: Processing high-speed pulse rate signals from fuel flow transmitters for real-time mass-flow computation.
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Please make an inquiry for more models:
| GE | A02B-0323-C125#M |
| GE | ATV31H037N4A |
| GE | USAGED-30A22K |
| GE | P0972ML |
| GE | F8B5B5B6G1 |
| GE | JDSUHST3000 |
| GE | 6ED1055-1MB00-0BA1 |
| GE | 1756SC-CTR8 |
| GE | 6ES7678-1RA00-0XB0 |
| GE | 6KXC143002X9A |
| GE | 6ed1052-1md00-0ba8 |
| GE | IRDH275-435 |
| GE | KT3315TA |
| GE | SGMRV-13ANA-YR12 |
| GE | VPM-82403X/P-6000 |
| GE | UNI2401 |
| GE | 6EP13322BA10 |
| GE | FP-VGA260S-CE4 |
| GE | 33A3BEPM-Z2 |
| GE | 6ES7135-0HF01-0XB0 |
| GE | TWDNAC485T |
| GE | 1SVR011718R2500 |
| GE | FX-2081EMERSON |
| GE | DXE-208C |
| GE | 6181f-15tpxpdc |
| GE | TSXSAY1000 |
| GE | 8AC110.60-1 |
| GE | 20BD077A0AYNAND0 |
| GE | IF8C5-30 |
| GE | RELIANCE2AX3000 |





