Description
Emerson 1C31218G01 Proximity Switch
Emerson’s industrial proximity switches—primarily offered through its TopWorx™ GO™ Switch lineup—combine non-contact magnetic sensing with dry-contact limit switch switching. Here’s a complete technical breakdown along with popular models to compare.
The TopWorx GO Switch 11-11124-A2 offers standard 3/8″ side sensing in a sealed stainless steel body built for washdown and hazardous zones.
1. Product Overview
- Operating Principle: Uses internal permanent magnets and a balanced armature. When a ferrous metal or magnetic target enters the sensing zone, it diverts the magnetic flux and snaps the internal contacts closed.
- Hybrid Design: It detects targets without physical contact like a proximity sensor, yet switches electrical loads directly like a mechanical limit switch.
- Form Factors: Available in square housings (10/20/30 Series) and threaded cylindrical bodies (70/80 Series) with side-sensing or end-sensing faces.
2. Typical Technical Specifications
- Sensing Distance: 0.100″ (2.5 mm) to 3/8″ (10 mm) standard for ferrous metal; up to 9/16″ (14 mm) on extended-range models, or farther with a target magnet.
- Contact Arrangements: SPDT (Form C), DPDT (Form CC), or DMDB (Form Z) dry contacts with gold-flashed silver alloy tips.
- Electrical Ratings: Up to 10 A @ 120 VAC, 5 A @ 240 VAC, and 3 A @ 24 VDC (varies by model).
- Power Consumption: 0 mA (passive dry-contact operation requires no external power supply).
- Operating Temperature: Standard -50 °C to +105 °C (-58 °F to +221 °F); high-temperature options reach +176 °C to +204 °C (+350 °F to +400 °F).
- Housing & Sealing: 304/316L stainless steel or coated brass, potted internal cavity, rated up to IP66/IP68 and subsea depths to 7,010 m (23,000 ft).
- Hazardous Area Approvals: UL, CSA, ATEX, and IECEx certifications for Class I/II Div 1 & 2, Zone 0 (Intrinsically Safe), Zone 1 (Explosion Proof), and Zone 2.
3. Key Advantages
- Zero External Power Needed: Unlike 2-wire or 3-wire inductive sensors, it draws no power and has zero leakage current or voltage drop, so you can wire multiple switches in series or parallel.
- No Mechanical Wear Parts: Eliminates exposed levers, rollers, springs, and cams that bend, jam, or break in dirty environments.
- High Noise & Environment Immunity: Unaffected by weld fields, radio-frequency interference (RFI), dust, mud, oil, or caustic washdowns.
- Snap-Action Vibration Resistance: Internal magnetic snap action maintains firm contact pressure, preventing contact chatter or false trips on vibrating machinery.
4. Installation & Usage Precautions
- Target Material Matters: Standard models only detect ferrous metals (carbon steel, iron, 400-series stainless) or magnets—they won’t trigger on aluminum, copper, brass, or 300-series austenitic stainless steel unless you attach a magnetic target.
- Watch Surrounding Metal: Keep surrounding ferrous mounting brackets outside the specified keep-out zone so they don’t prematurely trip or reduce the sensing range.
- Respect Hysteresis (Differential): Allow the target to move fully past the reset point before expecting the contacts to switch back.
- Hazardous Area Sealing: For explosion-proof Class I Div 1 installations, install an approved conduit seal within 18 inches of the switch housing per local electrical codes.
- Inductive Load Protection: Add arc suppression (such as a flyback diode for DC or RC snubber for AC) when switching solenoids or relay coils to extend contact life.
5. Common Applications
- Oil, Gas & Petrochemical: Valve position feedback, pig passage detection, and thief hatch monitoring in explosive atmospheres.
- Power Generation & Nuclear: Turbine valve verification and safety-related position sensing in extreme heat and radiation zones.
- Mining, Steel & Heavy Manufacturing: Conveyor alignment, crane travel limits, and foundry equipment exposed to heavy shock and weld fields.
- Subsea & Marine: ROV tooling, subsea manifold valves, and deck machinery exposed to saltwater corrosion and high pressure.
Decision Guide
- Pick a square model like the TopWorx GO Switch Model 11 or Model 31 if you’re replacing traditional bolt-on limit switches or need longer sensing distances up to 9/16″.
- Pick a threaded round model like the TopWorx GO Switch Model 81 if you need compact end-sensing in tight actuator brackets or threaded ports.
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Please make an inquiry for more models:
| Emerson | 12P0678X022 |
| Emerson | 12P0678X032 |
| Emerson | 12P0681X072 |
| Emerson | 12P0683X082 |
| Emerson | 12P1064X072 |
| Emerson | 12P1064X08R |
| Emerson | 12P1064X122 |
| Emerson | 12P1442X042 |
| Emerson | 12P1509X052 |
| Emerson | 12P1731X082 |
| Emerson | 12P1732X042 |
| Emerson | 12P1732X062 |
| Emerson | 12P2186X012 |
| Emerson | 12P2471X042 |
| Emerson | 12P2506X062 |
| Emerson | 12P2536X042 |
| Emerson | 12P3162X162 |
| Emerson | 12P3935X032 |
| Emerson | 12P4986X |
| Emerson | 13A0054G04 |
| Emerson | 13A0066G01 |
| Emerson | 13A0066G02 |
| Emerson | 13A0066G04 |
| Emerson | 13A0068G02 |
| Emerson | 13A0069G01 |
| Emerson | 13A0070H17 |
| Emerson | 13A0072G01 |
| Emerson | 13A0073G08 |
| Emerson | 13A0076G01 |
| Emerson | 13D0092G01 |




