Sale!

ABB SD822 3BSC610038R1 Power Supply Device

Brand: ABB

Model number: SD822 3BSC610038R1

Colour:new                                    Warranty: 12 months

Lead Time:3-day working day   Country of origin: Sweden

Price: Please contact us         Product weight:0.4kg

Category: SKU: SD822 3BSC610038R1 Brand:

Description

ABB SD822 3BSC610038R1 Power Supply Device

The ABB SD822 (3BSC610038R1) isn’t listed in current shopping results, so here is a full technical breakdown based on ABB’s AC 800M hardware documentation and industrial distributor specifications.

 

Product Overview

The ABB SD822 (catalog number 3BSC610038R1) is a switched-mode industrial DIN-rail power supply unit built for the ABB Ability™ System 800xA, AC 800M controllers, and S800 I/O automation hardware. It converts mains AC input voltage (selectable between 115 V AC and 230 V AC) into a regulated 24 V DC, 5 A (120 W) output for powering control processors, communication interfaces, and field I/O modules.

 

Technical Specifications

Parameter Specification Details
Brand / System ABB (System 800xA / AC 800M / S800 I/O)
Model / Part Number SD822 / 3BSC610038R1
Product Type Switched-Mode Industrial Power Supply Unit
Input Voltage Selectable 115 V / 230 V AC (via front selector switch)
Output Voltage 24 V DC (regulated, SELV/PELV compliant)
Output Current / Power 5 A continuous (120 W)
Built-In Protections Overload, short-circuit, and overvoltage protection
Degree of Protection IP20
Operating Temperature -40 °C to +70 °C
Storage Temperature -40 °C to +85 °C
Mounting Standard 35 mm DIN rail
Dimensions & Weight Approx. 65 mm (W) × 125 mm (H) × 105 mm (D); ~0.6–0.7 kg
Certifications CE, UL, RoHS, ATEX (Zone 2/22), Marine Type Approvals (LR, CRS)

 

Key Advantages

  • Clean, Regulated 24 V DC Power: Delivers low-ripple, tightly regulated 24 V DC power so sensitive AC 800M CPUs and S800 I/O modules run without voltage brownouts or noise interference.
  • Redundancy Ready: Supports parallel operation with voting diodes (such as the ABB SS822/SS823 voting units) to build fault-tolerant redundant power architectures for critical process loops.
  • Wide Thermal Tolerance: Rated for operation from -40 °C to +70 °C, allowing deployment in unconditioned cabinets, offshore platforms, and harsh industrial environments.
  • Comprehensive Fault Protection: Built-in short-circuit, overload, and overvoltage safeguards protect downstream controller electronics from damage during wiring or field faults.
  • Compact DIN-Rail Footprint: Slim 65 mm width saves horizontal space inside crowded marshalling and control cabinets.

 

Important Installation & Usage Precautions

  • Verify Input Voltage Selector Switch: Before applying mains power, check that the physical 115 V / 230 V AC selector switch on the unit matches your local supply voltage—applying 230 V AC while set to 115 V will damage the unit.
  • Enclosure & Ventilation Clearance: Rated IP20, so it must be mounted inside a suitable industrial control cabinet. Leave adequate top and bottom clearance around the unit for natural convection cooling, especially at ambient temperatures above 55 °C.
  • Redundant Wiring Setup: Do not tie the outputs of two SD822 units directly together without an appropriate decoupling/voting diode module (e.g., SS822 or SS823) if configuring 1+1 redundancy.
  • Upstream Circuit Protection: Install an appropriately rated miniature circuit breaker (MCB) or fuse on the AC input side to handle inrush current and provide branch-circuit isolation.
  • SELV/PELV Grounding: Follow ABB AC 800M grounding guidelines for the 0 V DC reference terminal (L-) depending on whether your plant standard requires grounded (PELV) or floating (SELV) control power.

 

Applications

  • Distributed Control Systems (DCS): Primary 24 V DC power source for ABB Ability™ System 800xA and AC 800M controller racks.
  • Remote I/O Marshalling Cabinets: Powers S800 I/O clusters, fieldbus communication interfaces, and two-wire field transmitters.
  • Oil, Gas & Petrochemical Plants: Certified for hazardous locations (ATEX Zone 2/22) in process automation and safety instrumentation cabinets.
  • Marine & Offshore Vessels: Approved by marine classification societies (such as Lloyd’s Register) for engine room automation, propulsion control, and shipboard power management.
  • Power Generation & Water Treatment: Provides continuous, high-MTBF power for turbine auxiliary controls, boiler management, and municipal treatment plants.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models:

ABB TU810v1
ABB DSQC400
ABB S1N125
ABB 3HAC028940-003
ABB 3HAB5760-1/06
ABB TB521-ETH-OTD
ABB PM591-ETH-OTD
ABB 3HAC025338-006
ABB ACS350-03E-01A9
ABB ACS510-01-157A-4
ABB AI845
ABB TU8383BSE008572R1
ABB AO810V23BSE038415R1
ABB RDNA-01
ABB 3HAC028954-004/03
ABB ACS355-03E-08A8-4
ABB TB84PH2000112
ABB TB82PH1010112
ABB TB567J1308T20
ABB PFEA111-65
ABB NAIO-03
ABB 3HNE00313-1
ABB CI626
ABB ACS550-01-06A9-4
ABB A95-30-22
ABB 3HAC2493-1
ABB CI854A
ABB HDL36150
ABB GJR5251300R0161
ABB DSQC378B