Sale!

ABB CI830 3BSE013252R1 Communication Interface

Brand: ABB

Model number: CI830 3BSE013252R1

Colour:new                                    Warranty: 12 months

Lead Time:3-day working day   Country of origin: Sweden

Price: Please contact us         Product weight:0.4kg

Category: SKU: CI830 3BSE013252R1 Brand:

Description

ABB CI830 3BSE013252R1 Communication Interface

 

Product Overview

The ABB CI830 (Order Code: 3BSE013252R1) is a PROFIBUS DP Fieldbus Communication Interface Module belonging to the ABB S800 I/O system family. It serves as the intelligent gateway and station slave adapter that connects remote S800 I/O clusters to a master controller or DCS via the standard PROFIBUS DP network protocol.

The module manages communication with the upper-level controller while supervising up to 12 S800 I/O modules connected along the local I/O bus (ModuleBus).

 

Technical Specifications

Parameter Specification Details
Product Model CI830
ABB Part Number 3BSE013252R1
Product Family Advant OCS / S800 I/O System
Product Type PROFIBUS DP Communication Adapter / Interface Module
Fieldbus Protocol PROFIBUS DP-V0 / DP-V1 (RS-485)
Communication Speed Automatic baud rate detection from 9.6 kbps up to 12 Mbps
Power Supply Voltage 24 V DC nominal (19.2 V DC to 30 V DC range)
Power Consumption Approx. 100 mA at 24 V DC
Local I/O Capacity Connects up to 12 S800 I/O modules on the local ModuleBus
Galvanic Isolation RS-485 interface isolated from 24 V DC power supply (500 V AC / 1 min)
Status Indicators LED indicators: Power (RUN), Fault (ERR), Line Status (Tx/Rx), ModuleBus
Operating Temperature 0 °C to +55 °C (+32 °F to +131 °F)
Protection Rating IP20
Dimensions & Weight Approx. 58.5 mm (W) × 136 mm (H) × 110 mm (D); approx. 0.3 kg

 

Key Advantages

  • High-Speed Communication: Supports PROFIBUS DP speeds up to 12 Mbps with automatic baud rate adaptation, providing fast cycle times for time-critical remote I/O data.
  • Compact & Modular Integration: Easily snaps onto a TU810/TU812 or compatible S800 terminal unit, providing a clean DIN-rail installation without taking up excess panel space.
  • Hot-Swappable Operation: Supports ModuleBus hot-swapping (“replace under power”) of S800 I/O modules to minimize process downtime during maintenance.
  • Comprehensive Self-Diagnostics: Built-in LED indicators and fieldbus reporting provide real-time diagnostics for bus status, module health, voltage errors, and channel faults.
  • Seamless Multi-Vendor Interoperability: Standard PROFIBUS DP protocol support allows S800 I/O racks to integrate not only with ABB System 800xA/Advant systems, but also with third-party PLCs (e.g., Siemens S7, Schneider, Rockwell).

 

Important Installation & Usage Precautions

  • Terminal Unit Requirement: The CI830 module must be installed on a compatible S800 base terminal unit (such as TU810V1, TU812V1, or TU830V1). Never mount or force the module directly onto a DIN rail without its terminal unit.
  • RS-485 Bus Termination: Proper 120 Ω bus line termination resistors must be activated at both physical ends of the PROFIBUS DP cable segment to prevent signal reflections and comm errors.
  • Station Address Setting: Ensure the PROFIBUS node address is correctly set via the module’s rotary switches before powering up. Avoid address collisions on the PROFIBUS network segment.
  • Power Supply Quality: Supply the unit with a regulated, low-ripple 24 V DC power source (PELV/SELV). Voltage transients outside the 19.2–30 V range can trigger fault trips or restart the adapter.
  • Shielding & Grounding: Use high-quality shielded twisted-pair cables for PROFIBUS connections. The cable shield must be correctly grounded to the protective earth (PE) at the cabinet entry point to prevent EMC interference.

 

Applications

  • Distributed Process Automation: Serves as remote I/O nodes for large-scale ABB System 800xA and Compact Product Suite installations across chemical, oil & gas, and pulp & paper plants.
  • Multi-Vendor System Integration: Integrates S800 field signals into third-party DCS or Siemens/Rockwell PLC control networks via standard PROFIBUS DP.
  • Power Generation & Water Treatment: Used in power plants, substations, and water purification facilities for high-density analog and digital signal collection across distributed skids.
  • Factory Automation & OEM Machines: Installed in packaging lines, continuous process machinery, and material handling systems requiring compact, scalable remote I/O expansion.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models:

ABB TU810v1
ABB DSQC400
ABB S1N125
ABB 3HAC028940-003
ABB 3HAB5760-1/06
ABB TB521-ETH-OTD
ABB PM591-ETH-OTD
ABB 3HAC025338-006
ABB ACS350-03E-01A9
ABB ACS510-01-157A-4
ABB AI845
ABB TU8383BSE008572R1
ABB AO810V23BSE038415R1
ABB RDNA-01
ABB 3HAC028954-004/03
ABB ACS355-03E-08A8-4
ABB TB84PH2000112
ABB TB82PH1010112
ABB TB567J1308T20
ABB PFEA111-65
ABB NAIO-03
ABB 3HNE00313-1
ABB CI626
ABB ACS550-01-06A9-4
ABB A95-30-22
ABB 3HAC2493-1
ABB CI854A
ABB HDL36150
ABB GJR5251300R0161
ABB DSQC378B