Description
1440-SPD02-01RB Allen‑Bradley Ethernet switches
Product Dimensions：
Product Detailed Description
The Allen-Bradley a model from the Stratix® 5700 series of managed industrial Ethernet switches, manufactured by Rockwell Automation. It is designed for robust, scalable network connectivity in demanding industrial environments, combining enterprise-class Cisco® Catalyst® switch architecture with industrial-grade performance. This compact, DIN-rail mountable switch supports EtherNet/IP networks and is optimized for automation and control systems. Key highlights include Power over Ethernet (PoE) capabilities for powering devices like IP cameras or wireless access points, and support for Device Level Ring (DLR) topology for high-availability redundant networking. It features “Lite” firmware, which provides essential Layer 2 management functions suitable for smaller-scale industrial applications.
Product Parameters
The following table summarizes the key technical specifications for the 1783-BMS12T4E2CGL:
| Parameter | Details |
|---|---|
| Total Ports | 18 ports (16 x 10/100 Mbps + 2 x 10/100/1000 Mbps combo) |
| Port Configuration | – 12 x Copper 10/100 Mbps RJ45 ports – 4 x PoE 10/100 Mbps RJ45 ports (IEEE 802.3af compliant, up to 15.4W per port) – 2 x Combo ports (copper RJ45 or SFP fiber slot, 10/100/1000 Mbps) |
| Switching Capacity | Up to 5.6 Gbps (non-blocking) |
| Forwarding Rate | Up to 4.17 Mpps |
| MAC Address Table Size | 8K entries |
| VLAN Support | Up to 255 VLANs (IEEE 802.1Q) |
| Power Supply | – Input: 12/24V DC (9.6–32V DC) – Power consumption: 25W (without PoE), up to 90W (with full PoE load) – PoE budget: 60W total |
| Dimensions (W x H x D) | 127 mm x 130 mm x 136 mm (5.00 x 5.10 x 5.35 inches) |
| Weight | 2.0 kg (4.4 lbs) |
| Mounting | DIN rail (horizontal/vertical) or panel mount |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Humidity | 5% to 95% (non-condensing) |
| Enclosure Rating | IP30 |
| Certifications | – UL/CSA: Class I, Division 2, Groups A, B, C, D (hazardous locations) – CE marked – C-Tick – EtherNet/IP conformance – Cisco IOS-based management |
| Firmware | Lite software (Layer 2 features: DLR, QoS, SNMP, web/CLI management) |
| UPC | 885630556789 |
Note: Specifications are based on standard Stratix 5700 series data; consult the official Rockwell Automation technical documentation for any model-specific variances.
Product Advantages
The 1783-BMS12T4E2CGL offers several advantages that make it a reliable choice for industrial networking:
- Industrial Durability: Built to withstand harsh conditions with a rugged metal enclosure, wide temperature range, and vibration/shock resistance, ensuring uptime in factories, warehouses, and process plants.
- Seamless Integration: Leverages proven Cisco technology for familiar management tools (e.g., web interface, CLI, SNMP), while being fully compatible with Rockwell Automation’s Integrated Architecture for EtherNet/IP devices.
- Cost-Effective Scalability: PoE support eliminates the need for separate power supplies for end devices, reducing installation costs. DLR enables sub-3ms fault recovery for real-time applications without complex spanning tree protocols.
- High Availability: Redundant power inputs and ring topology support minimize downtime, ideal for mission-critical automation.
- Ease of Use: Zero-touch provisioning via Device Level Ring Supervisor and intuitive configuration wizards simplify deployment for IT and OT teams.
- Future-Proof Design: Gigabit combo ports allow for fiber uplinks, supporting network growth without hardware upgrades.
Precautions and Notes
When installing and using the 1783-BMS12T4E2CGL, adhere to the following precautions to ensure safety and optimal performance:
- Installation: Mount on a stable DIN rail in a well-ventilated area. Avoid direct exposure to excessive dust, corrosive gases, or liquids. Use proper grounding to prevent electrostatic discharge (ESD).
- Power Supply: Connect to a Class 2 DC power source only. Verify voltage stability to avoid damage; use redundant power supplies for critical applications. PoE ports should not exceed the 60W total budget—monitor load to prevent overheating.
- Environmental Limits: Operate within 0–60°C ambient temperature; derate PoE performance above 45°C. Ensure at least 50 mm clearance around the unit for airflow.
- Configuration: Firmware updates should be performed via Rockwell Automation tools. Enable security features like port security and ACLs to protect against unauthorized access. DLR requires compatible ring devices for redundancy.
- Maintenance: Periodically inspect for loose connections and clean ports with compressed air. This product is not intended for life-support systems or applications where failure could cause injury—review Rockwell’s terms for liability.
- Compliance: Follow local electrical codes (e.g., NEC for hazardous locations). Dispose of as industrial electronic waste per regional regulations.
- General Warning: Unauthorized modifications void the warranty. For troubleshooting, refer to the Stratix Managed Switches User Manual (publication 1783-UM007).
Product Applications
The 1783-BMS12T4E2CGL is versatile for industrial automation scenarios requiring reliable, managed Ethernet connectivity:
- Manufacturing Lines: Connect PLCs, HMIs, sensors, and drives in assembly or packaging systems, using DLR for fault-tolerant control loops.
- Process Control: Deploy in oil & gas, water treatment, or chemical plants to power and network IP cameras, valves, and remote I/O modules via PoE.
- Material Handling: Integrate with conveyors, AGVs (Automated Guided Vehicles), and barcode scanners in warehouses for real-time data exchange.
- Building Automation: Link HVAC systems, access controls, and lighting in commercial facilities, leveraging VLANs for traffic segmentation.
- Distributed Networks: Serve as an edge switch in remote substations or mining operations, with fiber uplinks for long-distance connectivity.
For the most up-to-date details, visit the official Rockwell Automation product page or download the technical data sheet (publication 1783-TD001).
Shipping Port: Xiamen, China
Payment: Bank of Chicago, Bank of Singapore
Express cooperation: fedex, DHL, UPS and your express account
Service: Professional Sales provides 24 hours /7 days online service
Please make an inquiry for more models：
| AB | 1746-OB16 |
| AB | 1746-OB16E |
| AB | 1746-OB32 |
| AB | 1746-OB32E |
| AB | 1746-OB8 |
| AB | 1746-OBP16 |
| AB | 1746-OG16 |
| AB | 1746-OV16 |
| AB | 1746-OV32 |
| AB | 1746-OW16 |
| AB | 1746-OW16/C |
| AB | 1746-OW16/C/D |
| AB | 1746-OW4 |
| AB | 1746-OW8 |
| AB | 1746-OX8 |
| AB | 1746-P1 |
| AB | 1746-P2 |
| AB | 1746-P2/C |
| AB | 1746-P3 |
| AB | 1746-P4 |
| AB | 1746-P5 |
| AB | 1746-P6 |
| AB | 1746-P7 |
| AB | 1746SC-NI8U |
| AB | 1746SC-OAP8I |
| AB | 1747-ACN15 |
| AB | 1747-ACNR15 |
| AB | 1747-ACNR15/A |
| AB | 1747-ASB |
| AB | 1747-ASB/A |
| AB | 1747-ASB1747-L511 |
| AB | 1747-BA |
| AB | 1747-BSN |
| AB | 1747-BSN1771-IFE |
| AB | 1747-CP3/A |
